US-6S Transformer Drying Oven
We present to your attention a transformer vacuum oven US-6S, designed for drying the solid insulation of power transformers.
A common practice during the production or repair of power transformers is to remove moisture from paper insulation. The dried insulation has dielectric strength 20 times greater than not dried one, as moisture affects its dielectric breakdown.
Depending on the types of transformers there are several ways to remove moisture from the active part. One of them is drying with a vacuum oven.
Drying of power transformers with a vacuum oven has the following advantages:
- more intensive evaporation of moisture in comparison with drying with warm air or natural drying;
- optimal overall performance and reduced processing time.
GlobeCore offers a transformer vacuum oven with modifications, adapted to meet specific needs of the customer. The design, accounts for productivity, dimensions, and placement location, loading method, degree of automation, etc.
The following picture shows a vacuum drying cabinet US-6S.
Transformer vacuum oven: the main components and assemblies
1 – Control cabinet
2 – Vacuum unit BV-1000
3 – Compressor
4 – Oil heater PPM-18
5 – Vapor condenser
6 – Condensate collection tank
7 – Oven chamber
8 – Door of the oven chamber
9 – Sliding carriage
Principle of operation
The active part of the transformer is loaded onto the sliding carriage by a travelling crane or a loader. The control of the carriage movement (motorized drive), closing and opening of the doors of the oven chamber (pneumatic drive) is performed by an operator from the control cabinet.
To heating of the oven chamber is done by technical oil, which, in turn, is brought to the required temperature by an oil flow through heater.
Remember that the price for a transformer vacuum oven depends on the required dimensions, capacity, and technological features of the customer’s process.
Additional Features
Also, GlobeCore produces vacuum drying chambers for various raw materials:
- powders and pastes;
- food products;
- wood, etc.
| No. |
Parameter |
Value |
| Drying chamber | ||
| 1 | Internal dimensions, mm (in), max* | |
| – depth |
2,000 (78.7) |
|
| – width |
1,300 (51.2) |
|
| – height |
1,600 (63) |
|
| Heating section | ||
| 2 | Heater power, kW |
45 |
| 3 | Temperature adjustment range, °С (°F) |
20…120 (68…248) |
| 4 | Quantity of thermal electric heaters, pcs |
15 |
| Vacuum section | ||
| 5 | Capacity, m3/h (gal/min) |
1,000 (4,402) |
| 6 | Total power level of engines, kW |
11 |
| 7 | Achieved vacuum level, mbar |
1 (0.014) |
| Circulation system | ||
| 8 | Capacity, m3/h (gal/min) |
2,000 (8,804) |
| 9 | Fan power, kW |
2.2 |
| Exhaust system | ||
| 10 | Capacity, m3/h (gal/min) |
2,000 (8,804) |
| 11 | Fan power, kW |
1.1 |
| Condensation system | ||
| 12 | Chiller power, kW |
3.0 |
| 13 | Cooling performance of chiller, kcal/h |
6,000 |
| 14 | Condensation area, m2 (in2) |
7.5 (11,625) |
| 15 | Heat exchanger (condenser) type |
shell-and-tube |
| Pneumatic system | ||
| 16 | Compressor power, kW |
1.1 |
| 17 | Pressure, bar (psi) |
9 (130.5) |
*– The dimensions shown represent one of the possible configurations of the unit. GlobeCore manufactures vacuum chambers of various sizes according to the customer’s specifications.
- Uniform drying of the entire transformer core volume
- Economical use of electricity
- Reduced duration of drying
- Easy operation
- Removal of moisture from chamber







